Fluke 393FC, IRR1-SOL and MC4 Test Leads Solar PV Kit

Fluke 393FC, IRR1-SOL and MC4 Test Leads Solar PV Kit

The Fluke 393FC, IRR1-SOL and MC4 Test Leads Solar PV Kit is an ideal kit for technicians for the installation and maintenance of solar PV installations when working at high voltage.

The Kit includes: Fluke 393FC Solar Clamp meter, Fluke IRR-SOL Solar Irradiance meter, Fluke Pomona PVLEAD1 MC4 solar test leads and Fluke Pomona PVLEAD3 MC4 solar test leads. 

Fluke 393 CAT III 1500V Solar Clamp Meter with iFlex

The Fluke 393 is the only CATIII 1500V current clamp on the market that allows for solar testing and on DC environments up to 1500V. The clamp allows for measurement up to 1500V DC, 1000V AC and up to 999.9A DC or AC through the clamp jaw.

The audio polarity indicator helps prevent dangerous incidents, including accidental miswires . A visual continuity feature provides a bright green alert light on detection alerting users in noisy environments. The unit is IP54 rated for use outdoors, protecting from water and dust ingress.

While the the included iFlex current probe that can be twisted through small spaces, while still providing accurate extended ac current measurements up to 2500 amps.

The Fluke 393 is compatible with Fluke Connect App. Allowing users too wirelessly log results and measurements. Once saved the data can be stored, analysed and shared to customers and colleagues

Fluke FLK-IRR1-SOL Solar Irradiance Meter

With then Fluke FLK-IRR1 users are able to survey and report on solar panels or photovoltaic (PV) systems. Further testing for measuring irradiance, temperature, inclination and direction of a solar array in one simple to use instrument.

With an intuitive interface, built-in temperature sensor and rapid solar irradiation measurements competently meeting the defined IEC 62446-1 standards for photovoltaic systems, the Fluke IRR1-SOL also offers an integrated compass and inclination sensor, allowing quick measurement and detail of roof and site orientation, pitch, and panel tilt.

Whether you are looking to develop baseline forecasts, calculate the IV curve of power outputs, or simply conduct ongoing analysis and diagnosis, the Fluke IRR1-SOL is a solution that every solar installer and technician should have in their tool kit.

Fluke Pomona PVLEAD1 MC4 solar test leads

The Fluke Pomona PVLEAD1 MC4 solar test leads are a set of black and red MC4 to 4mm adaptor test leads for solar applications, allowing users to connect the Fluke 393 to PV panels, modules and systems via the 4mm banana plugs. The black lead is a MC4 (female) to 4mm sheathed banana plug on a 60 inch test lead. The red lead is a MC4 (male) to 4mm sheathed banana plug on a 60 inch test lead. The test leads allow for safe current and voltage measurements to be taken in PV modules and systems.

The Fluke Pomona PVLEAD1 MC4 solar test leads are CAT III 1000V and CAT IV 600V safety rated and comply with 20A ratings according to IEC/EN 61010-031 specifications, ensuring voltage and current can be measured safely.

Fluke Pomona PVLEAD3 MC4 solar test leads

The Fluke Pomona PVLEAD3 MC4 solar test leads include a black and red MC4 Solar power clamp test leads. The black MC4 test lead (male) breakout to 12 inch MC4 (female) and 36inch 4mm sheathed banana plug test lead. The red test lead is a MC4 (female) breakout to 12 inch MC4 (male) and 36 inch 4mm sheathed banana plug test lead. The leads are designed to be used alongside a solar clamp meter that accept 4mm sheathed banana plugs such as the Fluke 393, creating a connection between the solar panel and inverter for measuring with a clamp meter. The test leads allow for troubleshooting and maintenance of PV systems and safe DC power measurements to be conducted.

The Fluke Pomona PVLEAD3 MC4 solar test leads are CAT III 1000V and CAT IV 600V safety rated and comply with 20A ratings according to IEC/EN 61010-031 specifications

Key Features

• Fluke 393FC Solar Clamp meter
• View voltage and current simultaneously with the meter's dual display
• IP54 rated meter
• DC power measurement, showing readings in kVA
• Logging and data reporting of test results via Fluke Connect software
• Make instantaneous measurements to determine the watts per square solar irradiation, meeting IEC 62446-1 standards
• MC4 leads comply to IEC/EN 61010-031